Vout = (1.25R2) / (R1) for inverting converter. Vout = 1.25 (1+ (R2/R1)) for step down converter. Do not replace it with an ordinary PN junction diode. The collector terminals of the internal driver and switching transistors are shorted and connected to the base of the external switching transistor through resistor R3.ġN5822 is a 3A Schottky diode. Transistor Q1 is the external switching transistor. R2 and R1 can be used to set the output voltage. Resistors R1 and R2 forms a feedback network which feed backs a portion of the output voltage to the non inverting input of the Ics internal comparator. Both C2 and C3 must be rated at least 25V. Ct (in the circuit C1) is the timing capacitor for the ICs internal oscillator, C3 is the input filter capacitor and C2 is the output filter capacitor. A 15V inverting converter circuit using uA78S40 is shown above. For example if 5V DC is applied at the input of an inverting converter, the output voltage will be -5V DC. Inverting converter circuit using uA78S40Īn inverting converter is a circuit which reverses the polarity of a given input voltage.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |